Ayr Street, Auckland

Comprehensive residential waterproofing installation at Ayr Street, Auckland, including Allco Voltex, Swelltite and Nuralite membrane systems

• Project Details

  Location: Ayr Street, Auckland

  Architect: Ignite Architects Builder: SNL Construction

  Completed: May 2021

  Project Size: 1,045m²

• Systems Used

  Allco Voltex
  Installed under concrete slab, providing self-sealing protection against ground movement and shrinkage

  Allco Swelltite
  Applied to concrete walls, expanding on contact with water to prevent ingress through cracks

  Nuralite 3PM
  Torch applied membrane roofing

  Nuralite 3PT
  Torch applied tanking membrane

  Proclima Adhero Extasana
  Peel and stick building wrap applied around the building envelope

  Sika Blackseal Elastic
  Applied as part of the comprehensive waterproofing solution

• Quality Assurance

  All systems were installed in accordance with manufacturer procedures and MPM Waterproofing Group's quality assurance programme. MPM follows specific project requirements and manufacturer installation procedures to ensure workmanship of the highest standard, delivering long term protection across every system installed.

 

SNL Construction / Ignite Architects / Allco Voltex & Swelltite / Nuralite 3PM & 3PT

This striking linear residence on Ayr Street, Auckland was designed by Ignite Architects and constructed by SNL Construction, featuring bold contemporary architecture with sweeping views out to Mt Hobson. MPM Waterproofing Group worked on this project from May 2020 through to completion in May 2021, delivering a comprehensive 1,045m² waterproofing solution across multiple systems.

Due to the complexity of the home's design, a full range of waterproofing products was required across different areas of the structure. Allco Voltex membrane was installed under the concrete slab, providing self-sealing protection against the effects of ground movement and shrinkage. Allco Swelltite was applied to the concrete walls, expanding on contact with water to prevent ingress through any cracks in the structure. Nuralite 3PM and 3PT membrane systems were installed across roofing areas, while Proclima Adhero Extasana wrap was used around the building envelope to keep the RAB board protected during construction. Sika Blackseal Elastic was also applied as part of the comprehensive waterproofing solution.

---

Waterproofing services used on this project:

• Below Ground Tanking

• Membrane Roofing

These systems form part of MPM Waterproofing Group's residential waterproofing solutions across Auckland.

---

Working on a similar project?

MPM Waterproofing Group delivers proven waterproofing solutions across Auckland and Northland. With experience across residential and commercial projects, we work alongside builders, contractors, and developers to protect structures for the long term. Whether you're in the planning stage or ready to get started, we'd love to discuss your project.

Or contact us directly: 09 582 1390 / info@mpmwaterproofing.co.nz